• Taizhou Maisheng Mould Co., Ltd.
  • harry@maishengmold.com

+8618958550933 [ Whatspp / Wechat ]

Awesome Image

Plastic Injection Pet Preform and water bottle cap & handle mould mold

MSMold company not only offer you   Engineering service for plastic injection pet preform and water bottle   cap & handle moulds manufacturing, but also offer you the cap and   preform mold high speed molding solutions.
       

Product NamePlastic handle mould
Core &Cavity Steel2316#steel, S136, H13, 718, SKD61, P20, S50C, 45#steel, 4Cr13,
3Cr13, BeCu or based on customer's requirement.
Mould base & Standard ComponentDME,HASCO,MISUMI,LKM,Self-made etc.
Steel hardness: HRC30-35 for base material.
HRC45-48 for core and cavity material.
HRC60-62 for special parts material
Plastic materialPP,,PE,HDPE etc.
Cavity Number1*4, 1*6, 1*8,1*12, 1*16, 1*24,
Injection SystemPin gate, Submarine gate, Valve gate etc
Ejector Systemstripper plate, ejector sleeve, ejector pin
Cycle TimeBased on cap design 
Tooling lead time30-60 Days
Mould lifeAt least 1.5million Shots

 

Handle Mold Feature
1. Adopt imported steel P20, Germany 2316, S136 etc.
2. Each cavity and core have independent cooling system, with independent parts for replacement
3. Rational mold design to extend mold life and get high production efficiency.
4. Mirror hand polishing and mold plates chroming to create added-value.
5. Precision Machining to ensure high production efficiency & fine parting line effect.
6. Skilled Language in communication and experienced in international standard. 
7. Hot runner system: China advanced brand or imported hot runner system brand.
    Each cavity has independent temperature control and heater system.

  

Plastic handle mould
1.R&DWe support customer R&D. Make the files or improve the design if you needed.
2.Quotation MakingMould Quotation will be finished in 1 day according to information we get.
3.NegotiationThe quality, price, material, delivery time, payment item, etc.
4.Mould Design1-2days   for product 3D/2D drawing design as per customer's design or our   company's design. Then in further make the mould 2D/3D design.
5.Mould1. confirm the proucts and the mold design
2. Mould material prepare
3. Rough machining(heat treatment on mold base and pre-harden on mold)
4. CNC/ Vacuum Hardening on mold main spare parts
5. finishing machining( JDPAINT, DEM.etc)
6. Dimension inspection
7. Ejector& runner& cooling & other device process
8. Assemble mold
6.Mould TestingWhen moulds are finished, we will test the mould and we will send samples for consumer reference.
7. Sample confirmationIf   the first sample is not satisfied by customer when it is come out. We   modify the mould and until meet customer’s satisfaction.
8.DeliveryDelivery goods by sea or by air, according to customer’s requirement.